Dimplex Quantum storage heaters

Using your Dimplex Quantum storage heaters:

1. Turn the heater on both wall switches. It’s best to keep these switches on. It doesn’t mean the heater is ‘on’, but it will keep its smart functions running.
2. Keep a 30cm (one foot) gap in front of your heater to minimise fire risks
3. The controls are on the top right of the heater underneath a flap.
4. Dimplex Quantum controls, from left to right, are:
   1. A screen
   2. Three buttons: Menu, Back, and Advance
   3. A dial to change the settings. This can be rotated and pressed
5. Dimplex has provided a set of 18 videos showing how to operate every function of the Dimplex Quantum storage heaters. The key videos are included below.

Getting started

 

Setting the room temperature

 

Setting the date and time

It is essential to set the time and date on your heater. This will allow it to charge using off-peak electricity. The times will automatically update for daylight saving time and British Summer Time.

 

Selecting ‘Home all day’

The ‘Home all day’ setting will give you 13 hours of heat, spread through the day from 8am to 9pm.

 

Selecting ‘Out all day’

Are you going out? This setting will give you 7.5 hours of heat at the beginning and end of the day.

 

Setting ‘Holiday mode’

If you’re going to be away from home for a while, you can set a lower temperature for the time you’re away.

Top tip: if you set Holiday mode to end the day before you get back, your home will be nice and warm when you get home.

 

Boost heater

If you need a bit of extra heat, your heater has a small heating element that is useful when the core is empty (you’ve used up all the stored heat).

~